Hex Head Grip Screws for 1911 Pistols
An easy way to improve the looks of any 1911. Precision machined hex head
grip screws made from high quality tool steel, or 400 series stainless.
Heat treated for long lasting wear. Attractive hex head design prevents
screwdriver slips. Contoured screw heads blend beautifully with grip panels.
Set of four with Allen wrench included. The slim grips require special
bushings and slim grips, which can also be purchased from us. 803-24 and
804-24 are bulk packages of 24 grips screws without Allen wrench. |
 |
| 803 |
Hex Head Grip Screws |
Blue |
$7.95 |
<> |
| 804 |
Hex Head Grip Screws |
Stainless |
$8.95 |
<> |
| 803-SLIM |
Hex Head Grip Screws, slim |
Blue |
$15.95 |
<> |
| 804-SLIM |
Hex Head Grip Screws, slim |
Stainless |
$16.95 |
<> |
| 803-24 |
Hex Head Grip Screws, bulk pack |
Blue |
$41.95 |
<> |
| 804-24 |
Hex Head Grip Screws, bulk pack |
Stainless |
$44.95 |
<> |
|
Grip Screw Bushings
High quality replacement grip screw bushings. Supplied as a set of four.
The slim versions require slim grips and slim screws. |
 |
| 813 |
Grip Screw Bushings |
Blue |
$6.95 |
<> |
| 813-S |
Grip Screw Bushings |
Stainless |
$7.95 |
<> |
| 813-SLIM |
Grip Screw Bushings, Slim |
Blue |
$12.95 |
<> |
| 813-SLIM-S |
Grip Screw Bushings, Slim |
Stainless |
$15.95 |
<> |
Exotic Cocobolo Wood Checkered Grips
Natural exotic
wood, no stains or artificial colors are used. Not only are they attractive
but they are extremely functional because the wood is so hard the checkering
will hold up far better than any walnut can. Checkered in the original diamond pattern. We have
angle cut bottom, bobtail cut, and
slim versions available. Slim grips requires special slim bushings and screws, which
can also be purchased from us. The standard grip thickness is 1/4", while the slim grips thickness is 5/32".
These grips are not cut for an ambi safety. We can cut them for you,
please call to special order. |
 |
| 45812 |
Gov't Cocobolo grips, angle cut bottom, one pair |
$39.95 |
<> |
| 45815 |
Gov't Cocobolo grips, Bobtail®, one pair |
$49.95 |
<> |
| 45816 |
Slim Gov't Cocobolo grips, one pair |
$39.95 |
<> |
| 45816-BT |
Slim Gov't Cocobolo grips, Bobtail®, one pair |
$49.95 |
<> |
Laminate Checkered Grips
High performance guns need high performance grips. These laminate grips are stronger and more consistent in pattern and coloring than natural wood. Checkered in the original diamond pattern, coloring is similar to that of Cocobolo wood. We have
them available in angle cut bottom, flush cut bottom, bobtail cut, slim grips, and slim bobtail. Slim grips requires special slim bushings and screws, which
can also be purchased from us. The standard grip thickness is 1/4", while the slim grips thickness is 5/32". The flush cut bottom gives a finished look
to guns with magwell housing installed.
These grips are not cut for an ambi safety. We can cut them for you,
please call to special order. |
 |
| 45912 |
Gov't Laminate Grips, angle cut bottom, one pair |
$65.00 |
<> |
| 45912-BT |
Gov't Laminate Grips, Bobtail® cut, one pair |
$65.00 |
<> |
| 45912-MAGWELL |
Gov't Laminate Grips, flush bottom, one pair |
$65.00 |
<> |
| 45912-SLIM |
Slim Gov't Laminate Grips, one pair |
$65.00 |
<> |
| 45912-SLIM-BT |
Slim Gov't Laminate Grips, Bobtail® cut, one pair |
$65.00 |
<> |
Plunger Tube
High quality steel plunger tube fully machined from bar stock, with extra length studs for positive
crimping. Will work with all 1911 types including the High-Capacity types. Don't let a loose,
poor quality plunger tube tie up your gun. |
 |
| 821 |
Plunger Tube |
Blue |
$16.95 |
<> |
| 821-S |
Plunger Tube |
Stainless |
$17.95 |
<> |
Slide Stop
For positive, last round engagement and tighter, longer-lasting lockup with custom barrels.
Attractive grooves for positive, non-slip application. Made from hardened tool steel for increased
wear. Will fit all 1911 pistols High-Capacity types. The Hardcore® slide stop is guaranteed for life against breakage. |
 |
| 810 |
Slide Stop |
Blue |
$31.95 |
<> |
| 810-S |
Slide Stop |
Stainless |
$32.95 |
<> |
| 810-HC |
Hardcore® |
Blue |
$38.95 |
<> |
| 810-HCS |
Hardcore® |
Stainless |
$39.95 |
<> |
Forged Slide Stop
Fully machined in house by Ed Brown Products from a forging for the ultimate in strength and longevity. Heat treated to perfect hardness for lifetime performance. Features serrated lever, .200 diameter pin, and a built in detent for easy installation. Beautiful chamfered profile. Drops in most 1911's with no fitting. All versions of our forged slide stop are Hardcore® and guaranteed for life against breakage.
|
 |
| 970-45-HC |
Slide Stop, 45 ACP, Blue, Hardcore® |
$59.95 |
<> |
| 970-45-HCS |
Slide Stop, 45 ACP, Stainless, Hardcore® |
$61.95 |
<> |
| 970-38-HC |
Slide Stop, 38/9mm, Blue, Hardcore® |
$59.95 |
<> |
| 970-38-HCS |
Slide Stop, 38/9mm, Stainless, Hardcore® |
$61.95 |
<> |
| 970-40-HC |
Slide Stop, 40 S&W, Blue, Hardcore® |
$59.95 |
<> |
| 970-40-HCS |
Slide Stop, 40 S&W, Stainless, Hardcore® |
$61.95 |
<> |
|
