Trigger Pull Kit, 5 piece

(3 customer reviews)




This kit includes our famous Perfection Hammer and mated Perfection Sear, disconnector, sear spring and mainspring.

896/897 Perfection Hammer
Completely machined from barstock, these hammers are guaranteed for life against breakage. Improved design with a beautiful chamfer machined all the way around the outside, and also inside the hole. Commander style spur, finely serrated for positive gripping surface. Sides are narrowed to eliminate drag on slide. Lowered strut pin hole reduces full-cock spring pressure. Hammer hooks precisely machined at 020-.022 perfectly square with sharp corners, ready for light, final stoning. Made from alloy steel or stainless steel, heat treated Rc 52-54. The perfect mate for this hammer is our #874 Perfection Sear.

874 Perfection Sear
Computer designed and fully machined from top quality bar stock for the perfect profile. Recommended as a perfect fit with our Hammer #896 and #897 for the best trigger pull possible with the least amount of hand labor – no jigs necessary. Hammer contact angle already prepped ready for your favorite clearance angle. Specs: A2 tool steel, heat treated to 50 Rc.

811-M Perfection Disconnector
Fully machined from bar stock steel, not cast. The only product of it’s kind. The strongest available, and heat-treated for long life and extreme service use. Machined surfaces are finely finished and dimensionally exact. Designed to work perfectly with our Perfection Sear and Hammer for precise trigger jobs every time. Will work with all 1911 pistols including the Hi-Capacity types.

822 Sear Spring
High-quality, tempered spring with extra length on the center leg that allows precise tuning of the disconnector. Helps prevent disconnector failure and gives positive sear engagement. Guaranteed for life against breakage.

816 19# Mainspring
Mainsprings wear out due to age and use and should be replaced every 3,000-5,000 rounds. We recommend this spring rather than the factory standard for a lighter, longer-lasting trigger pull. Plenty of power to set off even the hardest of primers.

Share your thoughts!

5 out of 5 stars

3 reviews

Let us know what you think...

What others are saying

  1. Anonymous

    Drop-in in for my PT1911 9mm


    This set was drop-in for my Taurus PT1911 9mm and required no fitting beyond sear spring adjustment (I didn’t change out the mainspring). The OE group would give me hammer follow to half stop below 5.5 lbs. Now things are working well so far with the sear adjusted for a 4.25 lb. pull, which is right where I want it. I did have to file down some burrs in the trigger channel to get a consistent pull, but that’s a side note. The hammer is finished quite nicely. The disco does have some tooling marks below the surface coating, but it doesn’t seem to affect much functionally.

    Photo has been removed

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Anonymous

    I dropped this set into my Caspian 45.


    I exchanged this firing system for the one in my 45 and it brought my trigger pull from a 5.5 lb to a 3.5lb. Great match set.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Anonymous

    Ed Brown Quality ignition set for a reasonable price !!


    Bargain !!!!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...




Continue as a Guest

Don't have an account? Sign Up